Hood Surfaces; Light Bulbs; Warming Lamps - GE ZV30 Owner's Manual

Do not use a steel wool pad; it will scratch
Stainless
the surface.
steel surfaces
(on some To clean the stainless steel surface, use warm sudsy
water or a stainless steel cleaner or polish. Always
models)
wipe the surface in the direction of the grain.
Follow the cleaner instructions for cleaning
the stainless steel surface.
The bulbs are located on the underside of

Light bulbs

the hood.
To change the light bulbs:
1. Remove the trim ring by turning it
2. Grasp the bulb on the edges and remove
3. Replace with the same type and size bulb.
These 120 volt, 50 watt, par 16 halogen flood
bulbs, with standard base, are available at
specialty lighting stores.
These bulbs can also be ordered from your
GE supplier.
Order bulb no. WB08X10028.
Warming The warming lamps are located on the
underside of the hood.
lamps
These 120 volt, 175 watt, par 38 infrared heat
lamp bulbs, with standard base, are available
at some specialty lighting stores.
These infrared bulbs can also be ordered
from your GE supplier.
Order bulb no. WB08X10029.
8
counterclockwise.
by turning it counterclockwise.
Care and Cleaning
Professional Range Hood
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the location
of a dealer nearest you, please call our toll-free
number:
National Parts Center
ge.com
NOTE: If warming lamps are not desired,
additional cooktop lighting can be obtained
by replacing the infrared bulbs with standard
incandescent bulbs with up to 100 watt
maximum ratings, with standard bases. These
bulbs are available at specialty lighting stores.
1.800.626.2002