Featuresand Controls - Briggs & Stratton 030372 Operator's Manual

Featuresand Controls
_i ead this operator's manual and safety rules before operating yourgenerator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
o
/I
A - Choke Lever -- Used when starting a cold engine.
B - Fuel Valve-- Used to turn fuel supply on and off to
engine.
C - Air Cleaner -- Protects engine by filtering dust and
debris out of intake air.
D - Rocker Switch-- Set this switch to "On" before using
recoil starter. Set switch to "Off" to stop engine.
E - Recoil Starter -- Used to start the engine.
F- 0il Fill Cap -- Checkand add engine oil here.
6 - 0il Drain Plug -- Drain engine oil here.
H - GroundingFastener -- Consult your local agency having
jurisdiction for grounding requirements in your area.
J - Spark Attester Muffler -- Exhaust muffler lowers engine
noise and is equipped with a spark arrester screen.
K - EngineIdentification -- Provides model, type and code
of engine. Pleasehavethese readily available if calling for
assistance.
L= Fuel Tank -- Capacity of four (4) U.S.gallons (15 L).
IVl- Double Pole Circuit Breaker (AC) -- A double pole
circuit breaker is provided to protect the 20A receptacle
and generator against electrical overload.
N - 120/240 Volt AC, 20 Amp LockingReceptacle -- May
be used to supply electrical power for the operation of
120 and/or 240 Volt AC, 20 Amp, single phase, 60 Hz
electrical, lighting, appliance, tool and motor loads.
P - 120 Volt AC, 20 Amp, Duplex Receptacle -- May be
used to supply electrical power for the operation of
120 Volt AC, 20 Amp, single phase, 60 Hz electrical,
lighting, appliance, tool, and motor loads.
Items Not Shown:
Data Tag -- Provides model, revision, and serial number of
generator. Pleasehavethese readily availablewhen calling
for assistance.
10 BRIGGSandSTRATTON.COIVl