Power Supply - Vision Fitness R10 Owner's Manual

Please follow the safety instructions to place the Elliptical Trainer
in the location where it will best be used. It is important that
you place your Elliptical Trainer in a comfortable and inviting
room. Avoid putting your Elliptical Trainer in an unfinished
basement or undesirable setting. Exercise adherence will be
achieved only if you exercise in an attractive setting.
STABILIZING THE
ELLIPTICAL TRAINER
After positioning the Elliptical
Trainer in its intended location,
check its stability by attempting
to rock it side to side. Excessive
rocking or wobbling indicates
that your Elliptical Trainer needs
to be leveled. Your Elliptical
Trainer has levelers located under
the guide rails and under the
side stabilizers. Determine which
leveler is not resting completely
on the floor. Loosen the wing
nut to the base of the leveler to
allow the leveler to rotate. Now
rotate the leveler to the left or
right until the Elliptical Trainer is
stable. Lock the adjustment by
tightening the wing nut against
the stabilizer or guide rail.

POWER SUPPLY

Your Elliptical Trainer uses a wall mount external power
supply. Use only the power supply provided with your Elliptical
Trainer. If you misplace this power supply, please contact your
13
authorized Vision Fitness retailer for an original replacement.
Use of the wrong power supply may cause damage to your
Elliptical Trainer.