Troubleshooting - Vision Fitness R10 Owner's Manual

TROUBLESHOOTING

Our Bikes are designed to be reliable and easy to use. If,
however, you have a problem, these troubleshooting steps
may reveal the cause.
PROBLEM: The console does not light up.
SOLUTION: Check to make sure the power switch located on
the backside of the console is turned on.
SOLUTION: Make sure the power adapter is plugged into the
base of the Bike.
SOLUTION: Make sure the wire harness is plugged into the
back of the console.
PROBLEM: The Bike is
making a clicking noise.
SOLUTION: Using the pedal
wrench supplied with your
Bike, remove both the left
and right pedals, apply
grease to the threaded
portion and reassemble the
pedals onto the Bike. Make
sure the pedals are tight.
SOLUTION: Make sure the pedal straps or your shoe laces are
not hitting the side cover.
SOLUTION: Assure seat adjustment is tight (See page 8)
PROBLEM: The Bike makes a squeaking or creaking noise.
SOLUTION: Check and tighten all hardware.
10