Pairing The Keypad; Enabling Autopilot Control - Raymarine gs series Installation Instructions Manual

6.12 Pairing the keypad

The keypad can control 1 or more multifunction
displays. Multiple keypads can be connected to a
system. Each keypad can be paired with up to 4
multifunction displays.
With the keypad connected to the multifunction
display:
1. Select External Keypad from the External
Devices menu: homescreen > Set-up > System
Settings > External Devices > External
Keypad.
2. Select Pair Keypad.
3. Press any button on the external keypad.
4. From the pop-up message select the orientation
of the keypad.
Either landscape or portrait orientations are
available.
The keypad is now paired.
Unpairing the keypad
The keypad can be unpaired from an individual
display.
1. Select External Keypad from the External
Devices menu: homescreen > Set-up > System
Settings > External Devices > External
Keypad.
2. Select Clear Pairings.
3. Select Yes to unpair the keypad with the display.
Getting started

6.13 Enabling autopilot control

Enabling the autopilot control function —
SeaTalk and SPX SeaTalk
To enable control of your SeaTalk or SPX SeaTalk
autopilot using your multifunction display follow the
steps below.
From the Homescreen:
1. Select Set-up.
2. Select System Settings.
3. Select Autopilot Control so that On is
highlighted.
Selecting Autopilot Control will switch the control
between On and Off.
On a system containing multiple displays the pilot
control is enabled on all displays at the same time.
Enabling the autopilot control function —
Evolution autopilots
To enable control of your Evolution autopilot using
your multifunction display follow the steps below.
From the Homescreen.
1. Select Set-up.
2. Select System Settings.
3. Select External Devices.
4. Select Pilot Set-up.
5. Select Pilot control so that On is highlighted.
Selecting Pilot control will switch the Autopilot
control function on and off.
ng autopilots
ng
79