Bluetooth Troubleshooting - Raymarine gs series Installation Instructions Manual

9.11 Bluetooth troubleshooting

Aspects of the installation can cause problems with the data shared between wireless devices. Such
problems, their possible causes and solutions are described here.
Problem
No wireless connection.
No media player control.
Weak or intermittent Bluetooth
signal.
110
Possible causes
iPhone does not have
a Bluetooth connection
established with the
multifunction display.
Media player device is not
compatible with the Bluetooth
2.1+ EDR power class 1.5
(supported profile: AVRCP 1.0)
or higher.
"Audio Control" is NOT enabled
on the multifunction display.
Interference from other wireless
devices in the vicinity.
Possible solutions
Ensure that Bluetooth is enabled on the multifunction
display ( Homescreen: > Set-Up > System Settings >
Connections > Bluetooth > On).
Ensure that the "Bluetooth" option is enabled on the iPhone
(available from the phone's Settings / General menu).
Ensure that the Bluetooth device is paired with the
multifunction display that you want to use it with. To
do this: Homescreen: > Set-Up > System Settings >
Connections > New Bluetooth Connection.
Check the Bluetooth compatibility with the device
manufacturer. If the device is not Bluetooth 2.1+ EDR
power class 1.5 (supported profile: AVRCP 1.0) compatible
then it is not suitable for wireless use with the multifunction
display.
Enable "Audio Control" ( Homescreen: > Set-Up >
System Settings > Connections > Connections
Manager > Audio Control > On).
Multiple wireless devices running simultaneously (such
as laptops, phones, and other wireless devices) can
sometimes cause wireless signal conflicts. Temporarily
disable each wireless device in turn until you have
identified the device causing the interference.
gS Series installation instructions