Network Cable Types; Seatalk Ng Cabling Components - Raymarine gs series Installation Instructions Manual

12.6 Network cable types

There are 2 types of SeaTalk
"patch" and "network".
• Patch — for connecting the following devices to a
Raymarine network switch:
– Thermal camera via PoE injector.
– Additional Raymarine network switch.
– PC or laptop using Voyage Planner software.
• Network — for connecting the following devices
to a Raymarine network switch:
– Sonar Module.
– SR100 Sirius weather receiver.
– Additional compatible Raymarine multifunction
displays.
SeaTalk hs network cables
Cable
1.5 m (4.9 ft) SeaTalk hs
network cable
5 m (16.4 ft) SeaTalk hs
network cable
10 m (32.8 ft) SeaTalk hs
network cable
20 m (65.6 ft) SeaTalk hs
network cable
SeaTalk hs patch cables
Cable
1.5 m (4.9 ft) SeaTalk hs patch
cable
5 m (16.4 ft) SeaTalk hs patch
cable
10 m (32.8 ft) SeaTalk hs patch
cable
15 m (49.2 ft) SeaTalk hs patch
cable
20 m (65.6 ft) SeaTalk hs patch
cable
128
hs network cable —
Part number
E55049
E55050
E55051
E55052
Part number
E06054
E06055
E06056
A62136
E06057
12.7 SeaTalk ng cabling components
SeaTalk ng cabling components and their purposes.
Connection / Cable
Backbone cable (various
lengths)
T-piece connector
Terminator
Inline terminator
Spur cable
SeaTalk ng 5–way connector
Blanking plug
Notes
The main cable carrying data.
Spurs from the backbone are
used to connect SeaTalk ng
devices.
Used to make junctions in the
backbone to which devices
can then be connected.
Required at either end of the
backbone.
Used to connect a spur
cable directly to the end of a
backbone; useful for longer
cable runs.
Used to connect devices
to the backbone. Devices
may be daisy chained or
connected directly to the
T-pieces.
Used to branch, split, or
make additional connections
in SeaTalk or SeaTalk ng
networks.
Inserted into unused spur
connector positions in a
5-way connector or T-piece.
gS Series installation instructions