Keypad Connection - Raymarine gS Series Installation And Operation Instructions Manual

4.8 Keypad connection

The keypad can be connected directly to a
multifunction display's network connector or via a
network switch. Multiple keypads can be connected
to a system. Each keypad can be used to control up
to 4 multifunction displays. If the network does not
provide Power over Ethernet (PoE) then the keypad
must be powered separately.
Direct connection — gS Series multifunction
display
1. gS Series multifunction display.
2. Keypad.
When connecting the keypad directly to a gS Series
multifunction display the keypad is supplied with
PoE, from the multifunction display.
Direct connection — Raymarine multifunction
display
1. Multifunction display.
2. Keypad.
3. Right angled power cable.
When connecting the keypad directly to a New a
Series, New c Series or New e Series multifunction
display the keypad is not supplied with PoE, and so
requires power using the alternate power connector.
54
1
D12702-2
1
D12694-2
Network connection — gS Series multifunction
displays
1. gS Series multifunction display (supplying PoE
to the keypad).
2. Keypad.
3. Networked gS Series multifunction displays.
When connecting the keypad to a gS Series
multifunction display network the keypad is supplied
with PoE.
Network connection — Raymarine multifunction
displays
1. Network switch.
2. Keypad.
3. Right angled power cable.
4. Networked multifunction displays.
When connecting the keypad to a network switch the
keypad requires a separate power supply using the
alternate power connector.
Once connected the keypad must be paired with the
each multifunction display you want to control using
the keypad.
1
3 3
1 2
4
D12709-2
3
D12697-3
gS Series