Setting Up The Camera; Setting Up Wi-Fi Transmission - Interlogix TruVision 11 Series Installation Manual

Setting up the camera

Note: If the light source where the camera is installed
experiences rapid, wide variations in lighting, the camera may
not operate as intended.
To quickly put the camera into operation:
1. Prepare the mounting surface.
2 Mount the camera using the appropriate fasteners. See
"Mounting the wedge camera" on page 21.
3. Set up the camera's network and streaming parameters so
that the camera can be controlled over the network. For
further information, please refer to the "TruVision IP
Camera Configuration Manual".
4. Program the camera to suit its location. For further
information, please refer to the "TruVision 11/31 Series IP
Camera Configuration Manual".

Setting up Wi-Fi transmission

For setting up the Wi-Fi transmission, please refer to the
"TruVision 11/31 Series IP Camera Configuration Manual" for
details.
Wi-Fi transmission distance
The Wi-Fi transmission distance/range of the camera is
approximately 50 m (164 ft.) in open air applications.
Note: The transmission distance may vary due to the presence
of physical obstacles, such as trees, walls, elevators, fire doors,
furniture, etc. Avoid very solid walls and metallic objects in the
transmission path. Other Wi-Fi networks (for example Wi-Fi,
WiMAX) operating on 2.4 GHz and certain types of devices
(e.g., microwave oven point-to-point Wi-Fi transmission) can
12 Installation Guide