Table of Contents
Advertisement
Figure 5: IP VF dome camera
1.
Dome liner
2.
Housing
3.
Ethernet RJ45 PoE port
4.
Power supply
5.
Audio and alarm cables
6.
Lens
Setting up the camera
Note:
If the light source where the camera is installed
experiences rapid, wide variations in lighting, the camera may
not operate as intended.
To quickly put the camera into operation:
1.
Prepare the mounting surface.
2
Mount the camera on the ceiling using the appropriate
fasteners. See "Mounting the IP mini bullet camera" on
page 20.
Installation Guide
7.
Mounting plate
8.
Reset button
9.
Analog video output
10. Serial port
11. SD card
19
Advertisement
Table of Contents
