Table of Contents
Advertisement
Using the camera with TruVision Navigator
A camera must be connected to an Interlogix NVR or hybrid
DVR in order to be operated by TruVision Navigator. Please
refer to the TruVision Navigator user manual for instructions on
operating the camera with the TruVision Navigator.
Ensuring corrosion resistance
For normal outdoor or indoor applications, the camera has an
IP66 dust and water protection rating. Please follow the
installation instructions in the manual to mount the camera as
required.
silicone sealant
When installing the camera in a corrosive environment, such as
marine ships, coastal sites, or chemical factories, please use
silicone sealant (purchased separately) to seal the microphone
hole. The typical cure time is about one to two hours in the
temperature range between 40 and 100°F (5 and 40°C).
24
Installation Guide
Advertisement
Table of Contents
