Table of Contents
Advertisement
The camera housing and hardware are designed and
manufactured to ensure corrosion protection. However, it is
necessary to seal the cable connection during the installation
work. Following all local codes, use electrical tape or a
corrosion-resistant conduit box to connect the cables as
required.
Note: Sealing the microphone hole impacts the sensitivity of
camera audio input.
Specifications
TruVision IP wedge cameras
Electrical
Voltage input
Power consumption
Wi-Fi parameters
Wi-Fi standard
Frequency range
Communication
bandwidth
Security
Transmission rate
Transmission range
Installation Guide
12 VDC, PoE (IEEE 802.3af)
Max. 5 W
IEEE802.11b/g/n
2.4 to 2.4835 GHz
Support 20/40 MHz
64/128-bit WEP, WPA/WPA2, WPA-
PSK/WPA2-PSK, WPS
11b: 11Mbps, 11g: 54Mbps, 11n: up
to 150Mbps
Up to 50 m
* It varies depending on the actual
working environment.
25
Advertisement
Table of Contents
