Table of Contents
Advertisement
Mounting the wedge camera
To mount the wedge camera on a wall or ceiling:
1.
Drill the holes for the mounting hardware in the mounting
surface using the supplied drill template. To route the
cables from the base of the camera, drill a cable access
hole in the mounting surface.
2.
Mount the converter pan to the mounting surface (optional).
Note: If required, you can remove the tab (A) on the side
of the converter pan to pass the cables through.
3.
Loosen the screws with the tamper-resistant hex wrench
(supplied) to remove the camera cover.
Installation Guide
A
21
Advertisement
Table of Contents
