Disable: The communication channel will be consistent with the source device, or be
determined through negotiation between the receiver and the connecting device. And
the Managed Meetings feature is not available.
Note: By default, AGO is enabled.
3. Click the Apply button, and then click OK on the pop-up message box to confirm.
4. The receiver reboots, and new settings take effect after the reboot.
5.3.19. Setting up Communication Channel
When AGO is enabled, you can define a channel for communication between the wireless
display receiver and the source device.
Follow the procedure below to set up the receiver's communication channel:
1. Go to the Network Settings tab page by clicking the Network Settings tab.
2. Select a desired channel from the Channel Number drop-down box.
Channels from 1 to 11 belong to the 2.4 GHz band; and channels from 36 to 165 belong to
the 5 GHz band.
You should select a channel based on your network environment. Generally, cleaner
channels (where less devices work) will provide better performance. You can use Wi-Fi
45