Setting Up Broadcast Network Name - ActionTec ScreenBeam Pro SBWD100B User Manual

3. Click the Apply button, and then click OK on the pop-up message box to confirm.
4. The receiver reboots, and the new SSID takes effect after the reboot.

5.3.24. Setting up Broadcast Network Name

Follow the procedure below to set up the receiver's Broadcast Network Name:
1. Go to the Network Settings tab page by clicking the Network Settings tab.
2. To enable/disable the Broadcast Network Name feature, go to the Wireless Interface
Settings section, and set the Broadcast Network Name feature to Enable/Disable.
Note: By default, the Broadcast Network Name is disabled. The receiver's SSID is not
50