D. Decorative Fronts
WARNING! Risk of Fire! A decorative front is required
for this model. DO NOT operate this appliance without a
decorative front in place.
Only doors certifi ed for use with this appliance model may
be used. Contact your dealer for a list of doors that may
be used.
TONIC DECORATIVE FRONT
(TN-SLR-**)
Figure 13.10 Tonic Decorative Front
MARTINI DECORATIVE FRONT
(MT-SLR-**)
Figure 13.11 Martini Decorative Front
Inside and Overlap Fit
See Section 13.C.
Overlap Fit Only
See Section 13.C.
Heat & Glo • XLR-N-CE, XLR-PB-CE • 2198-900 Rev. N • 3/14
TONIC FRONT
A
B
Figure 13.12 Dimensions of Tonic Decorative Front
Table 1. Dimensions of Tonic Decorative Front
A
Top of decorative front to bottom of appliance.
B
Bottom of decorative front to bottom of appliance.
C
Inside dimension of decorative front (width).
D
Outside dimension of decorative front (width).
E
Inside dimension decorative front (height).
F
Outside dimension of decorative front (height).
E F
C
D
67 cm
17,5 cm
99,1 cm
113 cm
32,7 cm
49,5 cm
49