Qos Port Dscp Egressremark; Qos Dscp Map - Planet MGSW-28240F User Manual

QoS Port DSCP EgressRemark

Description:
Set or show the port DSCP remarking mode.
Syntax:
QoS Port DSCP EgressRemark [<port_list>] [disable|enable|remap_dp_unaware|remap_dp_aware]
Parameters:
<port_list>: Port list or 'all', default: All ports
: Disable DSCP egress rewrite
disable
enable
remap_dp_unaware : Rewrite DSCP in egress frame with remapped DSCP where remap is DP unaware or DP = 0
remap_dp_aware
(default: Show port DSCP egress remarking mode)
Default Setting:
disable
Example:
Enable DSCP egress rewrite
MGSW-28240F:/> QoS Port DSCP EgressRemark 1-10 enable

QoS DSCP Map

Description:
Set or show DSCP mapping table.
This table is used to map QoS class and DP level based on DSCP value.
DSCP value used to map QoS class and DPL is either translated DSCP value or incoming frame DSCP value.
Syntax:
QoS DSCP Map [<dscp_list>] [<class>] [<dpl>]
Parameters:
<dscp_list>: DSCP (0-63, BE, CS1-CS7, EF or AF11-AF43) list or 'all'
(default: Show DSCP ingress map table i.e. DSCP->(class, DPL))
: QoS class (0-7)
<class>
: Drop Precedence Level (0-1)
<dpl>
: Enable DSCP egress rewrite with the value received from analyzer
: Rewrite DSCP in egress frame with remapped DSCP where remap is DP aware and DP = 1
545
User's Manual of MGSW-28240F