Web Firmware Upgrade - Planet MGSW-28240F User Manual

4.2.17 Web Firmware Upgrade

This page facilitates an update of the firmware controlling the Managed Switch. The Web Firmware Upgrade screen in
4-2-20 appears.
To open Firmware Upgrade screen perform the folling:
1. Click System -> Web Firmware Upgrade.
2. The Firmware Upgrade screen is displayed as in
3. Click the "
4. Select on the firmware and then click "
5. Once the software be loaded to the system successfully, the following screen appears. The system will load the new
software after reboot.
DO NOT Power OFF
Do not quit the Firmware Upgrade page without pressing the "OK" button after the image is
loaded. Or the system won't apply the new firmware. User has to repeat the firmware
upgrade processes again.
Figure 4-2-20: Web Firmware Upgrade Page Screenshot
"button of the main page, the system would pop up the file selection menu to choose firmware.
Figure 4-2-21: Software successfully Loaded Notice Screen
the Managed Switch until the update progress is complete.
Figure 4-2-20.
". The Software Upload Progress would show the file upload status.
84
User's Manual of MGSW-28240F
Figure