4.9.3.2 TOS/DSCP Port Configuration
Set up IP TOS / DSCP mapping to 802.1p priority when receiving IPv4/IPv6 packets, the Managed Switch allow to by port
configuring the QoS Status. This TOS/DSCP Port Configuration page is to configure the IP TOS/DSCP mapping on the port
and display the current port status. The screen in
The table includes the following fields:
Object
Port Number
TOS/DSCP Status
Figure 4-9-6
Figure 4-9-6 : QoS Configuration – TOS/DSCP Port Status
Description
Indicate port 1 to port 26.
Enable / Disable TOS/DSCP map to 802.1p priority on specify port.
User's Manual of FGSW-Series
appears.
113