Qos Dscp Egressremap; Qos Storm Unicast - Planet MGSW-28240F User Manual

If port DSCP classification is 'selected', DSCP will be classified based on QoS class and DP level only for DSCP value
with classification mode 'enabled'. DSCP may be translated DSCP if translation is enabled for the port.
Syntax:
QoS DSCP Classification Mode [<dscp_list>] [enable|disable]
Parameters:
<dscp_list>: DSCP (0-63, BE, CS1-CS7, EF or AF11-AF43) list or 'all'
: Enable DSCP ingress classification
enable
: Disable DSCP ingress classification
disable
(default: Show DSCP classification mode)
Default Setting:
disable

QoS DSCP EgressRemap

Description:
Set or show DSCP egress remap table. This table is used if the port egress remarking mode is 'remap' and the purpose is
to map the DSCP and DP level to a new DSCP value.
Syntax:
QoS DSCP EgressRemap [<dscp_list>] [<dpl_list>] [<dscp>]
Parameters:
<dscp_list>: DSCP (0-63, BE, CS1-CS7, EF or AF11-AF43) list or 'all'
<dpl_list> : DP level list or 'all', default: All DP levels (0-1)
: Egress remapped DSCP: 0-63, BE, CS1-CS7, EF or AF11-AF43
<dscp>

QoS Storm Unicast

Description:
Set or show the unicast storm rate limiter.
Syntax:
QoS Storm Unicast [enable|disable] [<packet_rate>]
Parameters:
547
User's Manual of MGSW-28240F