The page includes the following fields:
Object
Mode of ARP
Inspection
Configuration
Port Mode
Configuration
Buttons
: Click to save changes.
:
Click to undo any changes made locally and revert to previously saved values.
4.12.13 ARP Inspection Static Table
This page provides Static ARP Inspection Table. The Static ARP Inspection Table screen in
The page includes the following fields:
Object
Delete
Port
VLAN ID
MAC Address
IP Address
Description
Enable the Global ARP Inspection or disable the Global ARP Inspection.
Specify ARP Inspection is enabled on which ports. Only when both Global Mode
and Port Mode on a given port are enabled, ARP Inspection is enabled on this
given port. All means all ports will have one specific setting.
: Click to translate all dynamic entries to static entries.
Figure 4-12-13: Static ARP Inspection Table Screen Page Screenshot
Description
Check to delete the entry. It will be deleted during the next save.
The logical port for the settings.
The VLAN ID for the settings.
Allowed Source MAC address in ARP request packets.
Allowed Source IP address in ARP request packets.
319
User's Manual of MGSW-28240F
Figure 4-12-13
appears.