Ip Source Guard Static Table - Planet MGSW-28240F User Manual

24-port 100/1000 base-x sfp with 4-port 10g sfp+ managed metro ethernet switch

Hide thumbs Also See for MGSW-28240F:

Table of Contents

The page includes the following fields:

 Mode of IP Source

Guard Configuration

Configuration

 Max Dynamic Clients

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

4.12.11 IP Source Guard Static Table

This page provides Static IP Source Guard Table. The Static IP Source Guard Table screen in

Enable the Global IP Source Guard or disable the Global IP Source Guard. All

configured ACEs will be lost when the mode is enabled.

Specify IP Source Guard is enabled on which ports. Only when both Global Mode

and Port Mode on a given port are enabled, IP Source Guard is enabled on this

given port. All means all ports will have one specific setting.

Specify the maximum number of dynamic clients can be learned on given

ports. This value can be 0, 1, 2 and unlimited. If the port mode is enabled

and the value of max dynamic client is equal 0, it means only allow the IP

packets forwarding that are matched in static entries on the specific port.

All means all ports will have one specific setting.

: Click to translate all dynamic entries to static entries.

Figure 4-12-11: Static IP Source Guard Table Screen Page Screenshot

User's Manual of MGSW-28240F

Figure 4-12-11