The Clock - Rangemaster Toledo XT 110 Dual Fuel User's Manual & Installation Instructions

The Clock

You can use the timer to turn the left-hand multifunction
oven on and off. The clock must be set to the time of day
before the ovens will work.
Setting the Time of Day
The 6-button LCD clock is shown in Fig. 2.20. When the
clock is first connected the display flashes ( 0.00 ) and (G)
alternately.
1. Press and hold both the [C] and [D] buttons down
(Fig. 2.21). Now press the [+] button (or the [–] button)
until the correct time shows.
2. Do not forget that it is a 24-hour clock.
3. If you need to reset the cooker, turn off the power supply
and wait for a couple of minutes and start again.
Setting the Minute Minder
1. Press and hold the [C] button (Fig. 2.22), and then press
the [+] button until the length of time you want to cook
for is shown (Fig. 2.23).
2. You can check the time remaining by pressing [C]. When
the beeper sounds cancel it by pressing [C].
•
The 'cook period', which is the length of time you
want the oven to cook for.
•
The 'stop time', which is the time of day you want the
oven to stop cooking.
To Stop the Oven Automatically
1. Press and hold the 'stop time' [E] button (Fig. 2.24) and
then press the [+] button (or [–] button) until the required
'stop time' shows (Fig. 2.25). AUTO will show in the
display.
2. Once the 'stop time' is reached, the beeper sounds.
3. To stop the beep turn the oven control knob to 0 first and
then press [ B ] once; press [ B ] again to return to manual
cooking.
To Start and Stop the Oven Automatically
1. Before you set the clock you must have two numbers
clearly in mind – the 'cook period' and the 'stop time' .
Note: You cannot set a start time directly – this is set
automatically by setting the 'cook period' and the 'stop time'.
2. Press and hold the [D] button (Fig. 2.26) and then press
the [+] button (or [–] button) until the required 'cook
period' shows (Fig. 2.27).
3. Now press and hold the [E] button (Fig. 2.28) and then
press the [+] button (or [–] button) until the required 'stop
time' shows (Fig. 2.29). Release the buttons.
4. AUTO will now show in the display.
5. Set the oven to the required temperature. When cooking
is finished the beeper will sound. Turn the oven knob
to the OFF position first, and then press the [ B ] button
once to stop the beep; press it again to return to manual
cooking.
ArtNo.302-0002 - 6BC annotated
A B
A – Minute minder, B – 'Cook' time, C – 'Stop' time,
D – Manual, E & F – Time setting buttons
ArtNo.302-0001 - 6-button clock
Fig. 2.22
ArtNo.302-0003 - 6BC
minute minder setting 1
Fig. 2.24
ArtNo.302-0005 -
6BC Stopping the oven 1
Fig. 2.26
ArtNo.302-0006 - 6BC
setting the cook time
Fig. 2.28
ArtNo.302-0005 -
6BC Stopping the oven 1
9
C D E F
ArtNo.302-0004 -
Minute minder setting 2
ArtNo.302-0005a -
6BC Stopping the oven 1a
ArtNo.302-0006 - 6BC
setting the cook time
ArtNo.302-0005a -
6BC Stopping the oven 1a
Fig. 2.20
Fig. 2.21
Fig. 2.23
Fig. 2.25
Fig. 2.27
Fig. 2.29