Conversion To Lp Gas; Injectors; Tap Adjustment; Stick On Label - Rangemaster Toledo XT 110 Dual Fuel User's Manual & Installation Instructions

8. Conversion to LP Gas

Check the 'Technical Data' section at the back of the book
that the hob is convertible to the gas you want to use.
A suitably competent person must perform the conversion.
After conversion the installation must comply with the
relevant regulations and also the local electricity supply
company requirements. Read the instructions before
converting this appliance.
Failure to convert the appliance correctly could invalidate
n n
any warranty or liability claims and lead to prosecution.
When servicing or replacing gas-carrying components
n n
disconnect from the gas supply before starting operation.
Check the appliance is gas sound after completion.
DO NOT use reconditioned or unauthorised gas controls.
n n
Disconnect from the electricity and gas supply before
n n
servicing.
Before electrical reconnection, check that the appliance is
n n
electrically safe.

Injectors

Remove the burner caps and heads. Remove the old jets
( ). Fit the new jets (see 'Technical Data' section at the
Fig.8.1
back of the book for correct jets). Reassemble in the reverse
order.

Tap Adjustment

Removing the Handrail
Remove the handrail. Now remove the 2 cross-headed screws
hidden behind the handrail end brackets (
Removing the Control Panel
Pull off all the control knobs and remove the fixing screws
underneath the control panel. Slide the panel to the right and
then pull forwards to remove, taking care not to damage the
wiring.
Bypass Screw Adjustment
Turn the bypass screw on each control clockwise to the stop
( ).
Fig.8.3
Refit the control panel.

Stick on Label

Stick the LP gas label over the natural gas part of the
appliance data label.
(some models)
).
Fig.8.2
A
ArtNo.311-0010 Injectors
A – Jet, B – Internal injector, C – External injector
Art No.210-0015 - Control panel fixings
the control valve bypass screw
27
B
C
ArtNo.0102-0011 - Screwing
Fig.8.1
Fig.8.2
Fig.8.3