Table of Contents
Advertisement
TS600CW_B02.book Page 43 Tuesday, January 24, 2006 10:57 AM
Call Restriction
You can prevent the unit from dialing phone numbers beginning with
specified digit(s) (1 digit or 2 digits). Phone numbers with the restricted
leading digits cannot be dialed out, except the emergency numbers (#)
stored in the Phonebook and Direct Dial memory ([M1], [M2] or [M3]).
Before using the Call Restriction feature, we recommend storing
emergency numbers in the memory of Direct Dial buttons (p. 34) and
Phonebook (p. 28) as emergency numbers (#).
To set the call restriction
Make sure that the handset is on the cradle and the SP-PHONE/
HEADSET indicator light is off.
1
Press [FUNCTION/EDIT].
2
Scroll to "Program ?" by pressing [
[
], and press [OK] (Yes key).
3
3
Scroll to "Call restrict ?" by
pressing [
4
] or [
4
Press
[OK] ( Yes key).
If you changed the password "1111"
(factory set), the display on the right
will be shown. Follow below steps 1
and 2.
1. Enter the password (p. 42).
2. Press [OK] (Next key). Go to step 5.
• If the wrong password is entered, 3
beeps will sound. Enter the correct
password.
5
Enter the number(s) (1 digit or 2 digits)
you want to restrict ([0] to [9]).
• If the wrong number is entered, press
[ERASE] and enter the correct number.
] or
4
3
].
Call restrict ?
34
[OK]=Yes
Restrict No.
:--
[OK]=Save
Enter password
:----
[OK]=Next
Enter password
:
¢¢¢¢
[OK]=Next
Example: "9" is entered.
Restrict No.
:9-
[OK]=Save
(Continued
)
43
Advertisement
Table of Contents
