Panasonic KX-TS6W User Manual

Integrated Telephone System
KX-TS6W
Model No.
Pulse-or-tone dialing capability
Operating Instructions
PLEASE READ BEFORE USE AND SAVE.
Panasonic World Wide Web address:
http://www.panasonic.com
for customers in the USA or Puerto Rico
Attach your purchase receipt here.
For your future reference
Serial No.
(found on the bottom of the unit)
Date of purchase
Name and address of dealer
If you need assistance with the set-up
or operation, please call
1-800-211-PANA(7262)
Panasonic Consumer Electronics
Company,
Division of Matsushita Electric
Corporation of America
One Panasonic Way, Secaucus, New Jersey
07094
Panasonic Sales Company,
Division of Matsushita Electric
of Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5, San Gabriel
Industrial Park Carolina, Puerto Rico 00985
PQQX13390ZA
Printed in USA AG0302AS0
1

Getting Started

1-A Location of Controls
(PROGRAM) Button (AUTO) Button (3-B)
(3-A, 4-A)
One-Touch Auto Dial
Buttons ((DIRECT) and
(TONE) Button (5-B)
(EMERGENCY))
(4-A, 4-B)
HANDSET
VOLUME Selector
(on the bottom
of the unit)
(1-B)
DIALING MODE
Selector (on the
bottom of the
unit (1-B)
(PAUSE) Button
(3-A, 4-A, 5-C)
RINGER Selector
(FLASH) Button (5-A)
(on the bottom of
the unit) (1-B)
(REDIAL) Button (2-A)
Accessories (included)
Handset....................................one
Handset Cord...........................one
Telephone Line Cord................one
• To order accessories, call 1-800-332-5368.
2 Operation
2-A Making Calls
1
Lift the handset.
2
Dial a phone number.
• If you misdial, hang up and start again from
step 1.
3
When finished talking, hang up.
To redial the last number dialed
1
Lift the handset.
2
Press (REDIAL).
• (REDIAL) will dial the last number you called
manually.
2-B Answering Calls
1
.
When the unit rings, lift the handset
2
When finished talking, hang up.
For assistance, please call: 1-800-211-PANA(7262)
1-B Settings
1
Connect the handset cord.
2
Connect the telephone line cord, then lift the
handset to confirm the dial tone.
Single-Line
Telephone Jack (RJ11C)
Telephone Line Cord
HANDSET
DIALING
VOLUME
MODE
Selector
Selector
Handset
RINGER
Selector
Handset Cord
3

Speed Dialer

3-A Storing Phone Numbers in Memory
You can store up to 10 phone numbers in the
memory stations.
The dialing buttons ((0) to (9)) function as
memory stations.
To prevent misdialing, store correct information in
memory location before using speed dial
1
Lift the handset.
2
Press (PROGRAM).
3
Enter a phone number up to 16 digits.
• If you misdial, hang up and start again from
step 1.
4
Press (PROGRAM).
5
Press a memory station number ((0) to (9)).
6
When finished, hang up.
• To store other number, repeat steps 1 to 6.
• If a pause is required for dialing, press (PAUSE)
where needed.
Pressing (PAUSE) counts as one digit (5-C).
3
Set the DIALING MODE selector to TONE.
• If you cannot dial, set to PULSE.
4
Set the RINGER selector to HIGH, LOW or OFF.
(Ex: "LOW" is selected.)
• When set to OFF, the unit will not ring.
5
Set the HANDSET VOLUME selector to HIGH,
MEDIUM or LOW.
(Ex: "MEDIUM" is selected.)
To store a dialed number in memory
(During a conversation)
Lift the handset
Phone number (up to 16 digits)
During a conversation, Press (PROGRAM)
twice Station number ((0) to (9)).
Hang up.
Speed Dial Card
Remove the speed dial card and use it as a
name or phone number index for stored
numbers.
Cover
Speed
Dial Card
For assistance, please call: 1-800-211-PANA(7262)
1-C Wall Mounting
The unit can be mounted on a wall phone plate.
1
Connect the telephone line cord to the unit.
2
Connect the telephone line cord to Single-Line
Telephone Jack. Mount the unit, then slide
down.
Wall Phone
Plate
To temporarily set the
handset down during
a conversation, place
it as shown here.
To erase a stored number
Lift the handset press (PROGRAM)
(PAUSE) (PROGRAM)
Station number ((0) to (9)).
Hang up.
3-B Dialing a Stored Number
1
Lift the handset.
2
Press (AUTO).
3
Press a memory station number ((0) to (9)).
• The stored number is dialed.
• The (REDIAL) button does not work for Speed Dialer.
To dial the number again, hang up and repeat steps
1 to 3.
• If the telephone line cord is disconnected more
than 3 days, the stored numbers may be erased.
Store phone numbers again.