Toll Restriction (Trs)/Call Barring (Barring) Features; Toll Restriction (Trs) - Panasonic KX-HTS824 Feature Manual

3.4 Toll Restriction (TRS)/Call Barring (Barring) Features

Conditions
Up to 20 Quick Dialing numbers can be assigned in Web
Maintenance Console.
It is possible to register a System Speed Dial as a Quick Dialing
destination (Phone Number).
It is not possible to register a Quick Dial number as the Quick Dialing
destination (Phone Number).
2.2.4 PBX Configuration—[1-4] System—Numbering Plan
3.4 Toll Restriction (TRS)/Call Barring (Barring)
Features

3.4.1 Toll Restriction (TRS)

Description
TRS can prohibit an extension user from making certain trunk calls by COS programming. It is applied when
the user goes off-hook, a Trunk line is seized and then a dialed number is sent to the Trunk line.
Each TRS is programmed to have a level for each time mode (day/lunch/night).
There are five levels available. Each levels are used to restrict calls.
Leading Digits table
In the Leading Digits table, the installer can set the leading digits to be restricted for each TRS level.
An outgoing trunk call made by an extension with a TRS level is first checked against the Leading Digits
table (longest match searching). If the leading digits of the dialed number (not including the Trunk Access
number) are found in the table, the call is restricted (made or disconnected).
TRS Override by System Speed Dialing
If the call is made using System Speed Dialing, the call can override the TRS. Each extension is
programmed to have a TRS level for System Speed Dialing. This feature permits all extension users to
make System Speed Dialing calls with the level for System Speed Dialing.
Allows or denies outgoing trunk calls according to Toll Restriction Level as decided in the following Flow
chart:
44 Feature Manual
Conditions
PIL Reference
Note