Caller Id Announce - AT&T CL84115 Complete User's Manual

Telephone settings
Handset settings

Caller ID announce

The caller ID announce feature lets you know who's calling without having
to look at the display. When you have an incoming call, the handset and/or
base speaks "Call from..." and the name of the caller based on the directory
or caller ID information. If the caller's name is private or unknown, the phone
number up to the last 11 digits will be announced. If the caller's phone
number is also private or unknown, no information will be announced. The
default setting is On.
To turn on or off the caller ID announce feature:
1. Press MENU/
2. Press or
q
CID
/�ELECT.
MENU
3. Press q or
CID
press /�ELECT.
MENU
4. Press q or
CID
press /�ELECT.
MENU
• �et all On/Off - Change the setting for the base and
all handsets.
Local handset - Change the setting for that handset only
•
(when programming from a cordless handset only).
Base - Change the setting for the telephone base only.
•
5. Press or
q
CID
/�ELECT. There is a confirmation tone and the screen
MENU
returns to the previous menu. If you change the setting for �et all On/Off,
the screen shows CID Annc ON/OFF on all H� & B�.
NOTES:
• To use the caller ID announce feature, you must subscribe to caller ID service from your
telephone service provider.
• If you have paired an AT&T TL80133 DECT 6.0 cordless speakerphone to the telephone base,
the caller ID announce setting for all devices also applies to the cordless speakerphone.
When the setting is On, the cordless speakerphone speaks "Call from..." and the name of the
caller based on the directory or caller ID information during an incoming call. If the caller's
name is unavailable, the phone number up to the last 11 digits will be announced.
• When there are up to five handsets registered, the telephone system supports caller ID
announce for all handsets. If six or more handsets are registered, the system supports caller
ID announce for the first four registered handsets only.
• This feature does not announce information for call waiting calls.
• It takes at least 2 rings for the phone to receive caller ID information and announce it. If
the phone is answered before the end of the second ring, the phone won't have time to
announce the caller's information.
• Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
• Caller ID announce is available in English only.
in idle mode to enter the main menu.
�ELECT
to scroll to �ettings, then press
p
DIR
p to scroll to Caller ID annc, then
DIR
p to scroll to the desired option, then
DIR
to highlight On or Off, then press
p
DIR
18
LCD language
>Caller ID annc
CALLER ID ANNC
>Local handset
HS CID ANNOUNCE
>On