Caller Id Announce - AT&T CL84115 Complete User's Manual

Telephone settings
Telephone base settings

Caller ID announce

The caller ID announce feature lets you know who's calling without having
to look at the display. When you have an incoming call, the handset and/or
base speaks "Call from..." and the name of the caller based on the directory
or caller ID information. If the caller's name is private or unknown, the phone
number up to the last 11 digits will be announced. If the caller's phone
number is also private or unknown, no information will be announced. The
default setting is On.
To turn on or off the caller ID announce feature:
Press MENU/
1.
main menu.
2. Press or
q
CID
/�ELECT.
MENU
3. Press or
q
CID
press /�ELECT.
MENU
4. Press or
q
CID
press /�ELECT.
MENU
• �et all On/Off - Change the setting for the base and all handsets.
Base - Change the setting for the telephone base only.
•
5. Press or
q
CID
is a confirmation tone and the screen returns to the previous menu. If you
change the setting for �et all On/Off, the screen shows CID Annc ON/OFF
on all H� & B�.
NOTES:
• To use the caller ID announce feature, you must subscribe to caller ID service from your
telephone service provider.
• If you have paired an AT&T TL80133 DECT 6.0 cordless speakerphone to the telephone base,
the caller ID announce setting for all devices also applies to the cordless speakerphone.
When the setting is On, the cordless speakerphone speaks "Call from..." and the name of the
caller based on the directory or caller ID information during an incoming call. If the caller's
name is unavailable, the phone number up to the last 11 digits will be announced.
• This feature does not announce information for call waiting calls.
• It takes at least 2 rings for the phone to receive caller ID information and announce it. If
the phone is answered before the end of the second ring, the phone won't have time to
announce the caller's information.
• Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
• Caller ID announce is available in English only.
in idle mode to enter the
�ELECT
to scroll to �ettings, then press
p
DIR
to scroll to Caller ID annc, then
p
DIR
to scroll to the desired option, then
p
DIR
to highlight On or Off, then press
p
DIR
29
LCD language
>Caller ID annc
CALLER ID ANNC
>Set all On/Off
/�ELECT. There
MENU
p
q
p
q