Answer An Incoming Call During An Intercom Call - AT&T CL84115 Complete User's Manual

Dect 6.0 corded/cordless telephone/answering system with caller id/call waiting
Hide thumbs Also See for CL84115:
Table of Contents

Advertisement

Multiple handset use
Intercom
If you have other registered device(s) or more than one handset, the
telephone base shows INTERCOM TO:. Use the dialing keys to enter a
specific handset number (1-9 for handsets 1-9, TONE followed by 0-2
for handsets 10-12, # for a single headset/speakerphone, # followed
by 1 or 2 for headset/speakerphone 1 or 2, or TONE followed by # for
all devices), or press
press
MENU
Calling all handsets.
The destination handset(s) rings and shows Base is
calling, BA�E 0 is calling or BA�E 0 is calling all.
2. To answer the intercom call, press �HONE/
/��EA�ER
��EA�ER or any dialing key (0-9, TONE , or # )
on the destination handset. Both the base and the
handset now show Intercom.
3. To end the intercom call, one party presses
OFF/
CANCEL
the charger, presses CANCEL on the telephone base,
or hangs up the corded handset. The other party hears four beeps. Both
devices display Intercom ended.
NOTES:
Before the intercom call is answered, you can cancel it by pressing
handset or CANCEL on the telephone base.
If the called device is not answered within 100 seconds, or if it is in use, on a call or out of
range, the initiating device shows No answer. Try again..
To temporarily silence the intercom ringer, press
handset, or press CANCEL or MUTE on the telephone base.
You can only use one pair of devices at a time to make intercom calls.
For cordless headsets and speakerphones, refer to the corresponding user's manual on how
to answer and end an intercom call.
If a total of two cordless headset(s) and/or speakerphone(s) are registered to the telephone
base, they appear as HEAD�ET 1 and HEAD�ET 2, respectively, in the intercom menu.

Answer an incoming call during an intercom call

If you receive an outside call during an intercom call, there is a two-beep call
waiting tone.
To answer the call, press �HONE /
also lift the corded handset or press
The intercom call ends automatically. The party on the intercom call hears
four beeps. Other system devices can also answer the incoming call by
pressing �HONE /
/��EA�ER or lifting the corded handset on the telephone base.
To end the intercom call without answering the incoming call, press
/ CANCEL on the handset or CANCEL on the telephone base. You can
OFF
also return the corded handset back to the telephone base.
NOTE: For cordless headsets and speakerphones, refer to the corresponding user's manual
on how to answer an incoming call during an intercom call.
press q
CID
/�ELECT. The telephone base shows Calling HAND�ET X or
or places the cordless handset back in
or
FLA�H
or p
to scroll to the desired handset and
DIR
. The other party hears four beeps. Both
The other party hears four beeps. Both
OFF/
on the cordless handset. You can
FLA�H
/��EA�ER on the telephone base.
/��EA�ER on the handset, or pressing
46
,
FLA�H
Intercom
10:01
/CANCEL on the
OFF
or MUTE/
CANCEL
DELETE
enter a
BASE 0
is calling
10/15
PM
on the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl84215Cl84265Cl84365

Table of Contents