Temporary Tone Dialing - AT&T CL84115 Complete User's Manual

Telephone operation
Options while on calls
To access the caller ID log while on a call:
1. Press MENU/
2. Press or
q
CID
3. Press q or
CID
/�ELECT to dial the number shown.
4. Press
MENU
To access the redial list while on a call:
1. Press REDIAL/
dialed number.
2. Press or
q
CID
or press REDIAL/
number. Then, press Then, press
NOTES:
• You cannot edit a directory entry while on a call. For more details about the directory,
see the Directory section starting on page 54.
• You cannot copy a caller ID entry into the directory while on a call. For more details about
the caller ID log, see page 64.
• If you press REDIAL/
numbers and you cannot erase the entries. For more details about the redial memory, see
page 37.
/
• Press CANCEL on the handset or CANCEL on the telephone base to exit redial,
OFF
directory or caller ID log when on a call.

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
1. During a call, press TONE .
2. Use the dialing keys to enter the desired number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing after you end the call.
.
�ELECT
to scroll to Caller ID log, then press
p
DIR
p to scroll to the desired number.
DIR
to show the most recently
�AU�E
to scroll to the desired number,
p
DIR
repeatedly to find the desired
�AU�E
/�ELECT to dial the number shown.
MENU
while on a call, you can only view the 10 most recently dialed
�AU�E
41
/�ELECT.
MENU
R E D I A L #1/10
8 0 0 - 3 6 0 - 4 1 2 1
p
q