Additional Functions; Delay Start - Miele PG 8056 Operating Instructions Manual

Additional functions

Setting the start
time
52

Delay Start

The start time of a program can be delayed, e.g. to benefit from
economy rates of electricity. A delay start time of between 1 minute
and 24 hours can be selected.
Delay start must be switched on in the Settings menu (see
"Settings , Delay start").
If delay start has been switched off, it will not be visible when
additional functions are called up.
When using the delay start function, make sure that the detergent
compartment is dry before adding detergent. Wipe dry with a cloth
if necessary.
If the compartment is wet, detergent can become lumpy and stick
to the dispenser, with the result that it is not fully dispensed.
Turn the dishwasher on with the  button.

Select the program you require (see "Operation, Selecting a

program"). The LED on the Start/Stop button will flash.
Press the OK button.

Start time
­­ : ­­
Use the arrow buttons  (higher) and  (lower) to set the hours and

minutes and confirm each entry using the OK button.
When you have entered the start time, press the Start/Stop button.

Normal plus
Temperature
Turn on at
The selected program, along with the temperature and start time, will
then be displayed.
To cancel a set delay start before it has started, switch the
dishwasher off using the  button.
55 °C
12:30