Miele PG 8056 Operating Instructions Manual page 42

Operation
LEDs in the
keypad
42
Light-emitting diodes that indicate the status of the dishwasher are
set into the keypad.
Except for the Start/Stop button, which has a green LED in normal
operation, all other LEDs light up yellow.
In the event of a fault the Start/Stop button flashes red.
Keypad LED
ON
(On/Off)
button
FLASHES
OFF
Button 1-3 ON
(program
shortcut
buttons)
OFF
ON
button
(additional
programs)
OFF
ON
Start/Stop
FLASHES
button
GREEN
FLASHES
RED
OFF
Status
The dishwasher is switched on.
The dishwasher has gone into standby
mode after the preset time.
The dishwasher is turned off.
The respective program has been
selected. At the end of the program, the
LED will remain lit until a different
program is selected.
The program is not selected or the
program settings are being selected.
A program was selected from the
program list. At the end of the program,
the LED will remain lit until a different
program is selected.
No program has been selected from the
list or the program settings are being
selected.
A program is running.
A program has been selected, but not
yet started.
A fault has occurred.
A program has finished.