Miele PG 8056 Operating Instructions Manual page 68

Additional settings
Enter PIN code
68
If in the Release menu you have selected the
have set the Additional settings
you have to enter a PIN code.
Settings within the Additional settings
by people with administration rights.
The PIN code is set at the factory to 8 0 0 0 if access in
settings is blocked.
In this instance, the display will show the following message:
Enter code
0 0 0 0
Use the  and  arrow buttons to enter the numerical values and

confirm each one with the OK button.
Each press of the OK button takes the highlighting to the next input
position automatically.
Each digit entered is replaced by an asterisk (*).
The protected settings are released once all digits have been
correctly entered.
If the PIN code is entered incorrectly, the following message will
appear in the display:
Wrong code entered
Confirm the message with the OK button.

The display will then revert to the input menu.
Block
menu up for access via a PIN code,
menu can then only be changed
K
OK
option, or if you
Additional