Epson EB-U32 User Manual page 84

Wireless Network Projection
e
Select the Basic menu and press [Enter].
f
Select the basic options as necessary.
• Projector Name lets you enter a name up to 16 alphanumeric
characters long to identify the projector over the network.
• Web Control Password lets you enter a password up to 8
alphanumeric characters long for accessing the projector over the
Web. (Default user name is EPSONWEB; default password is
admin.)
• Projector Keyword lets you turn on a security password to prevent
access to the projector by anyone not in the room with it. You must
enter a displayed, randomized keyword from a computer using the
EasyMP Network Projection software to access the projector.
Use the displayed keyboard to enter the name, passwords and
a
keyword. Press the arrow buttons on the remote control to
highlight characters and press [Enter] to select them.
g
Select the Wireless LAN menu and press [Enter].
h
Select the Connection Mode setting.
• Quick lets you quickly connect to one computer.
• Advanced lets you connect to computers over a wireless network
access point.
i
If you selected the Advanced connection mode, select Search Access
Point to select the access point you want to connect to.
If you need to assign the SSID manually, select SSID to enter the
a
SSID.
j
For the Advanced connection mode, assign the IP settings for your
network as necessary.
• If your network assigns addresses automatically, select IP Settings to
set the DHCP setting to On.
• If you must set addresses manually, select IP Settings to set the
DHCP setting to Off, and then enter the projector's IP Address,
Subnet Mask, and Gateway Address as necessary.
84