Input Signal Settings - Signal Menu - Epson EB-U32 User Manual

Input Signal Settings - Signal Menu

Normally the projector automatically detects and optimizes the input signal
settings. If you need to customize the settings, you can use the Signal menu.
The available settings depend on the currently selected input source.
You cannot select settings on the Signal menu when the current input
a
source is one of the following:
• USB Display
• USB
• LAN
You can restore the default settings of the Tracking, Sync., and
a
Position settings by pressing the [Auto] button on the remote control.
To change settings for an input source, make sure the source is connected and
select that source.
Setting Options
Resolution Auto
Normal
Wide
Description
Sets the input signal resolution if not
detected automatically using the Auto
option.
Setting Options
Aspect See the list of
available aspect
ratios.
Tracking Varying levels
available
Sync. Varying levels
available
Position Up
Down
Left
Right
Auto Setup On
Off
Overscan Auto
(For component Off
video and RGB
4%
video signal input)
8%
103
Description
Sets the aspect ratio (width-to-height
ratio) for the selected input source.
Adjusts the signal to eliminate vertical
stripes in computer images.
Adjusts the signal to eliminate fuzziness
or flickering in computer images.
Adjusts the image location on the screen.
Automatically optimizes computer image
quality (when On).
Changes the projected image ratio to
make the edges visible by a selectable
percentage or automatically.