Selecting Password Security Types; Projector Security Features - Epson EB-U32 User Manual

Projector Security Features

You see the prompt "Change the password?".
c
Select Yes and press [Enter].
If you select No, the Password Protection setting menu is
a
displayed again.
d
Hold down the [Num] button on the remote control and use the
numeric buttons to set a four-digit password.
The password displays as **** as it is entered. A confirmation prompt is
displayed when you enter the fourth digit.
e
Enter the password again.
You see the message "Password accepted". If you enter the password
incorrectly, a message is displayed prompting you to re-enter the
password.
f
Press [Esc] to return to the menu.
g
Make a note of the password and keep it in a safe place.

Selecting Password Security Types

After setting a password, you see this menu, allowing you to select the
password security types you want to use.
If you do not see this menu, hold down the [Freeze] button on the remote
control for 5 seconds until the menu appears.
• To prevent unauthorized use of the projector, select On as the Power On
Protection setting.
• To prevent changes to the User's Logo screen or related display settings,
select On as the User's Logo Protection setting.
• To prevent changes to network settings, select On as the Network
Protection setting.
You can attach the password protect sticker to the projector as an additional
theft deterrent.
Be sure to keep the remote control in a safe place; if you lose it, you will
a
not be able to enter the password.
77