Projector Indicators Status - Epson EB-U32 User Manual

Projector Indicators Status

The indicators on the projector indicate the projector status and let you know
when a problem occurs. Check the status and color of the indicators and then
refer to this table for a solution.
Power indicator
Status indicator
B
Wireless LAN indicator (operates only on EB-U32 and EB-W32)
C
Lamp indicator
D
Temp (temperature) indicator
E
Indicator and status Problem and solutions
Power: Lit blue Normal operation.
Status: Lit blue
Lamp: Off
Temp: Off
Power: Lit blue Warming up or shutting down. When warming up, wait
about 30 seconds for an image to appear.
Status: Flashing blue
All buttons are disabled during warm-up and shutting
Lamp: Off
down.
Temp: Off
Indicator and status Problem and solutions
Power: Lit blue Standby, sleep mode, or monitoring.
Status: Off When you press the power button, projection starts.
Lamp: Off
Temp: Off
Power: Flashing blue Preparing for monitoring and all features are disabled.
Status: Off
Lamp: Off
Temp: Off
Power: Flashing blue Projector is too hot.
Status: Indicator status
• Make sure that the vents and air filter are not clogged
varies
with dust or obstructed by nearby objects.
Lamp: Indicator status
• Clean or replace the air filter.
varies
• Make sure the environmental temperature is not too
Temp: Flashing orange
hot.
Power: Off Projector has overheated and turned off. Leave it turned
off to cool down for 5 minutes.
Status: Flashing blue
• Make sure that the vents and air filter are not clogged
Lamp: Off
with dust or obstructed by nearby objects.
Temp: Lit orange
• Clean or replace the air filter.
• If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's
Extended menu.
s Extended > Operation > High Altitude Mode
• If the problem persists, unplug the projector and
contact Epson for help.
135