Wireless Network Projection; Installing The Wireless Lan Module - Epson EB-U32 User Manual

Wireless Network Projection

You can send images to your projector through a wireless network.
• To do this, you must install the Epson 802.11b/g/n wireless LAN module,
and then set up your projector and computer for wireless projection (EB-
W31/EB-X36/EB-X31/EB-S31/EB-U04/EB-W04/EB-X04/EB-S04/EB-
U130/EB-W130/EB-X130/EB-S130/EB-X350/EB-X300/EB-S300).
• Some models have built-in wireless LAN modules (EB-U32/EB-W32). You
don't need to install the Epson 802.11b/g/n wireless LAN module.
There are two ways to connect the projector to your wireless network:
• Using the optional Quick Wireless Connection USB Key (Windows only)
• Configuring the connection manually using the projector's Network menus
After installing the wireless LAN module and setting up the projector, install
the network software from the Epson Projector Software CD-ROM (if
available) or download the software, as necessary. Use the following software
and documentation to set up and control wireless projection:
• EasyMP Network Projection software sets up your computer for wireless
network projection. See the EasyMP Network Projection Operation Guide for
instructions.
• EasyMP Multi PC Projection software allows you to hold interactive
meetings by projecting the computer screens of users over a network. See
the EasyMP Multi PC Projection Operation Guide for instructions.
g g Related Links
• "Installing the Wireless LAN Module"
• "Selecting Wireless Network Settings Manually"
• "Selecting Wireless Network Settings in Windows"
• "Selecting Wireless Network Settings in OS X"
• "Setting Up Wireless Network Security"

Installing the Wireless LAN Module

To use the projector over a wireless network, install the Epson 802.11b/g/n
wireless LAN module (EB-W31/EB-X36/EB-X31/EB-S31/EB-U04/EB-
W04/EB-X04/EB-S04/EB-U130/EB-W130/EB-X130/EB-S130/EB-X350/EB-
X300/EB-S300). Do not install any other type of wireless LAN module.
p.82
p.83
p.85
p.85
p.85
Attention
Never remove the module while its indicator is blue or flashing, or while you are
projecting wirelessly. This could damage the module or lose data.
a
Use a cross-head screwdriver to remove the screw that secures the
wireless LAN module cover.
b
Connect the wireless LAN module to the USB-A port.
82