Projector Setup Settings - Eco Menu - Epson EB-U32 User Manual

Projector Setup Settings - ECO Menu

Settings on the ECO menu let you customize projector functions to save
power.
When you select a power-saving setting, a leaf icon appears next to the menu
item.
Setting Options
Power Normal
Consumption
ECO
Light Optimizer On
(Available when Off
Power
Consumption is set
to Normal.)
Description
Selects the brightness mode of the
projector lamp:
Normal: sets maximum lamp brightness.
ECO: reduces lamp brightness and fan
noise, and saves power and lamp life.
You cannot select settings when you use
your projector at high altitude or in
locations subject to high temperatures.
When set to On, the lamp brightness is
adjusted according to the projected
image. This helps to reduce the power
consumption by lowering the lamp
brightness according to the scene being
projected.
The setting is stored for each Color
Mode.
Setting Options
Sleep Mode On
Off
Sleep Mode Timer 1 to 30 minutes
Lens Cover Timer On
Off
A/V Mute Timer On
Off
Standby Mode Communication
On
Communication
Off
ECO Display On
Off
Reset —
• When the Sleep Mode Timer setting is enabled, the lamp dims for a
a
short time before the timer limit is reached and the projector turns
off.
• When the Lens Cover Timer or A/V Mute Timer settings are
enabled, the lamp uses less power when the lens cover is closed or
A/V Mute is activated.
g g Related Links
• "Projector Setup Settings - Extended Menu"
115
Description
Automatically turns off the projector
after an interval of inactivity (when On).
Sets the interval for Sleep Mode.
Automatically turns off the projector
after 30 minutes if the lens cover is
closed (when On).
Automatically turns off the projector
after 30 minutes if A/V Mute is enabled
(when On).
Communication On indicates that the
projector can be monitored over a
network when the projector is in standby
mode. Enable this setting to allow the
following operations to occur when the
projector is in standby mode:
• Monitor and control the projector over
a network
Displays a leaf icon in the bottom left
corner of the projected screen to indicate
the power-saving status when the lamp
brightness changes (when On).
Resets all adjustment values on the ECO
menu to their default settings, except for
Standby Mode.
p.107