Controlling the Volume with the Volume Buttons
The volume buttons control the projector's internal speaker system.
You must adjust the volume separately for each connected input source.
a
Turn on the projector and start a presentation.
b
To lower or raise the volume, press the [Volume] buttons on the
control panel or remote control as shown.
The [Volume] buttons on the control panel are available only
a
with EB-U32/EB-W32/EB-W31/EB-X36/EB-X31/EB-U04/EB-
W04/EB-X04/EB-U130/EB-W130/EB-X130/EB-X350/EB-X300.
A volume gauge appears on the screen.
c
To set the volume to a specific level for an input source, select Volume
in the projector's Settings menu.
Caution
Do not start a presentation at a high volume setting. Sudden loud noises may cause
hearing loss.
Always lower the volume before powering off, so that you can power on and then
gradually increase the volume.
g g Related Links
• "Projector Feature Settings - Settings Menu"
p.105
55