Solutions When "Not Supported" Message Appears; Solutions When Only A Partial Image Appears; Solutions When The Image Is Not Rectangular - Epson EB-U32 User Manual

Solving Image or Sound Problems
a
Open the System Preferences utility and select Displays.
b
Select the Display or Color LCD option, if necessary.
c
Click the Arrange or Arrangement tab.
d
Select Mirror Displays.

Solutions When "Not Supported" Message Appears

If the message "Not supported" is displayed, try the following solutions:
• Make sure the correct input signal is selected on the projector's Signal
menu.
• Make sure the computer's display resolution does not exceed the projector's
resolution and frequency limits. If necessary, select a different display
resolution for your computer. (See your computer manual for details.)
g g Related Links
• "Input Signal Settings - Signal Menu"

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:
• Press the [Auto] button on the remote control to optimize the image signal.
• Try adjusting the image position using the Position setting in the
projector's Signal menu.
• Press the [Aspect] button on the remote control to select a different image
aspect ratio.
• Change the Resolution setting in the projector's Signal menu according to
the signal for the connected equipment.
• If you zoomed into or out of the image using the [E-Zoom] buttons, press
the [Esc] button until the projector returns to a full display.
p.103
• Check your computer display settings to disable dual display and set the
resolution within the projector's limits. (See your computer manual for
details.)
• Check the resolution assigned to your presentation files to see if they are
created for a different resolution. (See your software help for details.)
• Make sure you selected the correct projection mode. You can select Front,
Front/Ceiling, Rear, or Rear/Ceiling as the Projection setting in the
projector's Extended menu.
g g Related Links
• "Input Signal Settings - Signal Menu"
• "Projector Setup Settings - Extended Menu"
• "Supported Monitor Display Resolutions"

Solutions When the Image is not Rectangular

If the projected image is not evenly rectangular, try the following solutions:
• Place the projector directly in front of the center of the screen, facing it
squarely, if possible.
• If you adjusted the projector height using the projector feet, press the
keystone buttons on the projector to adjust the image shape.
• Turn on horizontal keystone slider in the projector's Settings menu. Then,
adjust the slider until the image is evenly rectangular.
Settings > Keystone > H/V-Keystone > H-Keystone Adjuster
s
• Turn on automatic adjustment in the projector's Settings menu. The
projector automatically corrects the image every time you move the
projector.
Settings > Keystone > H/V-Keystone > Auto V-Keystone
s
• Adjust the Quick Corner setting to correct the image shape.
Settings > Keystone > Quick Corner
s
g g Related Links
• "Auto V-Keystone" p.41
• "Correcting the Image Shape with the Keystone Buttons"
• "Correcting the Image Shape with Quick Corner"
140
p.103
p.107
p.153
p.42
p.43