Changing A Bulb - Ford TOURNEO CONNECT Owner's Manual

4. Remove the wiper blade.
Install new wiper blades in the reverse
order.
Note: Make sure that the wiper blade locks
into place.
Double Rear Doors
1. Lift the wiper arm.
2. Position the wiper blade at right angles
to the wiper arm.
3. Disengage the wiper blade from the
wiper arm.
Tourneo Connect (C4A) M1 Kombi/N1 Kombi, ET7J-19A321-AKA (CG3606en) enGBR, Edition date: 02/2014
Maintenance
4. Unhook the wiper blade from the wiper
arm.
5. Slide the wiper blade to the side.
6. Remove the wiper blade.
Install new wiper blades in the reverse
order.
Note: Make sure that the wiper blade locks
into place.

CHANGING A BULB

Switch all of the lamps and the
ignition off. Failure to follow this
warning could result in serious
personal injury.
143
WARNINGS