Ford TOURNEO CONNECT Owner's Manual page 180

Note: When you drive to another part of the
country, stations that broadcast on
alternative frequencies, and are stored on
preset buttons, may be updated with the
correct frequency and station name for that
area.
Autostore Control
• Press and hold RADIO.
• When the system completes the
search, it will restore sound and store
the strongest signals on the autostore
presets.
Note: This will store up to a maximum of
the 10 strongest signals available, either
from the AM or the FM frequency band, and
overwrite the previously stored stations. You
can also store stations manually in the same
way as other frequency bands.
Traffic Information Control
Many stations that broadcast on the FM
frequency band have a TP code to signify
that they carry traffic program information.
Turning Traffic Announcements On and
Off
Before you can receive traffic
announcements, you must press either the
TA or TRAFFIC button. A TA display will
appear to show the feature is switched on.
If you are already tuned to a station that
broadcasts traffic information, TP will also
be displayed. Otherwise the unit will search
for a traffic program.
When traffic information is broadcast, it
will automatically interrupt normal radio
or CD playback and a message will appear
in the display.
If a non-traffic station is selected or
recalled using a preset button, the audio
unit will remain on that station unless TA
or TRAFFIC is turned off, then on again.
Tourneo Connect (C4A) M1 Kombi/N1 Kombi, ET7J-19A321-AKA (CG3606en) enGBR, Edition date: 02/2014
Audio System
Note: If traffic announcement is on and you
select a preset or manual tune to a non
traffic announcement station no traffic
announcements will be heard.
Note: When you are listening to a non
traffic announcement station and turn
traffic announcement off and on again a TP
seek will occur.
Traffic Announcement Volume
Traffic announcements interrupt normal
broadcasts at a preset minimum level that
is usually louder than normal listening
volumes.
To adjust the preset volume, use the
volume control to make the necessary
adjustment during an incoming traffic
announcement broadcast. The display will
show the level selected.
Ending Traffic Announcements
The audio unit will return to normal
operation at the end of each traffic
announcement. To end the announcement
prematurely, press TA or TRAFFIC during
the announcement.
Note: If you press TA or TRAFFIC at any
other time it will switch all announcements
off.
Automatic Volume Control
When available, automatic volume control
adjusts the volume level to compensate
for engine noise and road speed noise.
Press the MENU button.
Action
2
1. Use the left or right arrow button to
adjust the setting.
178
Message
1 Audio settings
Adaptive volume