Driving Aids; Speed Limiter; Using Speed Limiter - Ford TOURNEO CONNECT Owner's Manual

SPEED LIMITER

WARNING
When driving downhill your vehicle
speed may increase above the set
speed limit. The system will not
apply the brakes, you will hear an audible
tone and the set speed limit displayed in
the information display will flash.
The system allows you to set a speed to
which your vehicle then becomes limited.
The set speed limit will become the
effective maximum speed of your vehicle.
You can temporarily exceed the set speed
limit if required, for example to overtake.

Using Speed Limiter

Switching Speed Limiter On and
Off
Press and release LIM to switch the
system on. The information display will
prompt you to set a speed limit. Press and
release LIM to switch the system off.
Note: To return to speed limiter mode while
in cruise control mode, press and release
LIM.
Note: For cruise control switch operation.
See Using Cruise Control (page 103).
Tourneo Connect (C4A) M1 Kombi/N1 Kombi, ET7J-19A321-AKA (CG3606en) enGBR, Edition date: 02/2014

Driving Aids

Setting the Speed Limiter
When prompted press and hold SET+ or
SET-. The speed is stored as a set speed
and displayed in the information display.
Canceling the Speed Limiter
Press and release CAN to place the system
in standby mode. The information display
will confirm the system is in standby mode
by displaying the set speed limit as crossed
out in the information display.
Resuming the Speed Limiter
Press and release RES. The information
display will confirm the system is no longer
in standby mode by displaying the set
speed limit in the information display.
Intentionally Exceed the Speed Limiter
Set Speed
Fully press and release the accelerator
pedal to place the speed limiter in standby
mode. Use the accelerator pedal normally
to intentionally exceed the set speed limit.
The speed limiter set speed will resume
when your vehicle speed drops below the
set speed limit.
Note: If you intentionally exceed the set
speed limit, the set speed limit displayed in
the information display will flash.
Unintentionally Exceed the Speed
Limiter Set Speed
If you unintentionally exceed the set speed
limit, you will hear an audible tone and the
set speed limit displayed in the information
display will flash.
105