Ford TOURNEO CONNECT Owner's Manual page 215

When You Select
Delete
Master
Conn.
Discon.
System Settings
1. Press the MENU button.
Tourneo Connect (C4A) M1 Kombi/N1 Kombi, ET7J-19A321-AKA (CG3606en) enGBR, Edition date: 02/2014
SYNC
2. When a message to begin pairing appears in the audio
display, search for SYNC on your cell phone. Refer to your
device's manual if necessary.
3. When prompted on your cell phone's display, enter the
six-digit PIN provided by the system in the audio display.
The display indicates when the pairing is successful.
4. When the option to set the cell phone as the primary
cell phone appears, select either yes or no.
5. Depending on the functionality of your cell phone, you
may be asked extra questions (for example. if you would
like to download your phonebook). Select either yes or no
to confirm your response.
Delete a paired cell phone.
Select the delete option and confirm when the system
asks to delete the selected device. After deleting a cell
phone from the list, the cell phone can only be connected
again by repeating the full pairing process.
Set a previously paired cell phone as your primary cell
phone.
Select the master option to confirm the primary cell phone.
The system attempts to connect with the primary cell
phone every time you switch the ignition on. When a cell
phone is selected as primary, it appears first in the list and
is marked with an asterisk.
Connect a previously paired cell phone. You can only have
one cell phone connected at a time to use the cell phone
functionality. When another cell phone is connected, the
previous cell phone will be disconnected from the tele-
phone services. The system allows you to use different
Bluetooth devices for the cell phone functionality and the
Bluetooth audio music playback feature at the same time.
Select this option to connect to the selected previously
paired cell phone.
Disconnects the selected cell phone. Select this option
and confirm when asked to. After disconnecting a cell
phone, it can be connected again without repeating the
full pairing process.
2. Select the SYNC settings option, then
213
You Can
press the OK button.