Updating The Phone Firmware; Assigning Receive Connection - Gigaset C530 ip User Manual

Assigning receive connection(s)
Prerequisite: Several connections are configured for your phone.
v Ï
¤ ¤ ¤ q Telephony
OK
The internal participants (handsets) are displayed.
q
¤
Select the internal participants that should be assigned new receive connections.
All configured connections and the Gigaset.net connection are displayed.
r
¤
Select Yes if you want the relevant connection to be the receive connection for the
internal participant. Select No if it should not be the receive connection. s
¤
Switch to the next connection.
¤
Repeat the steps for each connection.
Notes
u
If a new connection is configured, it is assigned as the receive connection to all internal
participants and answer machine Answer Machine 1.
u
If a connection is not assigned as the receive connection to any internal participant, calls
on this connection will not be signalled.

Updating the phone firmware

If necessary, you can update your phone's firmware.
The firmware update is downloaded directly from the Internet by default. The relevant web page
is preconfigured in your phone.
Prerequisite:
u
The phone is connected to the Internet (i.e. connected to a router,
u
The phone is in idle status i.e. no calls are being made, there is no internal connection
between the registered handsets, the base menu is not open in any of the handsets.
Starting the firmware update manually
v Ï
¤ ¤ ¤ q System
OK
The phone establishes a connection to the Internet.
Notes
u
The firmware update can take up to six minutes, depending on the quality of your DSL
connection.
u
When updating from the Internet, checks are made to ensure that no newer version of
the firmware exists. If this is not the case, the operation is terminated and a message is
issued to that effect.
¤ q Rec. Connections
¤
Save
¤ q Update Firmware
Configuring the system settings
¤
OK
¢
¤ ¤
OK Enter system PIN.
¤
Start the firmware update with Yes.
¤
OK
page 13).
¤
OK
57