Gigaset C530 ip User Manual page 123

Configuring the phone via the Web configurator
Note
Observe the following for good voice quality:
u
When making calls using VoIP, avoid performing other Internet activities (e.g. surfing the
Internet).
u
Please note that voice delays can occur depending on the codec used and the network
capacity utilisation.
Assigning send and receive connections
For the number assignment, open the web page:
¤
Settings Telephony
Assign send and receive connections to the registered handsets.
The following should be observed:
u
During registration, each handset is automatically assigned the fixed line network
connection as a send connection and all base connections as receive connections.
u
You can assign each handset either a fixed send connection or a line selection. With line
selection, you choose the connection to be used for each call.
u
The Gigaset.net number is fixed as the send connection for each registered handset.
Numbers that end in #9 are automatically dialled via Gigaset.net.
Activating the fixed line network connection as the fallback send
connection
You can activate the fixed line network connection on your phone as a fallback connection. If a
call attempt fails via VoIP, an attempt is automatically made (without prompting) to establish a
connection via the fixed line network.
A fallback is used in the following situations:
u
Your VoIP connections are busy
u
The SIP server for the VoIP connection cannot be accessed
u
The dialled VoIP connection has not yet been configured or has not been configured
correctly (e.g. incorrect password)
u
The phone does not have a connection to the Internet, for example, because your router is
deactivated or not connected to the Internet.
Exception
SMS messages that are to be sent via a VoIP connection are not sent via the fallback
connection.
The option to activate the fallback connection is on the web page:
¤
Settings Telephony
122
¤
Number Assignment
¤
Number Assignment