Gigaset C530 ip User Manual page 79

Network mailbox
Configuring a network mailbox for fast access
You can use fast access to make direct calls to a network mailbox.
Assigning key 1, changing assignment
Fast access settings are device-specific. You can assign a different network mailbox to key
on each registered handset.
No network mailbox is preconfigured for fast access in the default settings.
¤
Press and hold the
Or:
v Ì
¤ ¤
Answer Machine
The list of VoIP connections and the fixed line network connection assigned to the handset as
receive connections is displayed. Net AM: xxx are displayed, where xxx is replaced by the
relevant default name of the connection (Net AM: IP1 to Net AM: IP6, Net AM: Fixed Line).
s
¤
Select an entry.
If a number is already stored for this network mailbox, fast access is activated immediately.
¤
Press and hold the End call key
If no number is saved for the network mailbox, you are asked to enter the number of the network
mailbox.
s
¤
Switch to the Network Mailbox line.
¤ ¤
Save Press and hold the End call key
Fast access is activated.
Note
You can only assign fast access to one network mailbox.
You can also call the network mailboxes of the handset's receive connections directly via the
¢
message key (
Calling the network mailbox via fast access
¤
Press and hold.
If you have set a network mailbox for fast access, you are connected directly to this network
mailbox.
d
¤
If necessary, press the handsfree key.
You will hear the network mailbox announcement.
q
¤
Select an answer machine.
Displaying new messages in the idle display of the handset
If a new message is present on one of the network mailboxes that is assigned to the handset via
its receive connection, or on the local answer machine, the icon
messages are displayed in idle display. The
78
key.
¤ ¤
OK
Ø
¤
Select ( = activated).
a
page 79).
¤
OK
q Set Key 1
(idle status).
¤
Enter the number of the network mailbox.
a
(idle status).
f
message key flashes.
Ã
and the number of new