Setting Phone Functions; Activating/Deactivating Call Waiting For Calls; Using Call Forwarding (Cf); Call Waiting - Gigaset N720 DECT IP Installation, Configuration & Operation

Setting phone functions

Activating/deactivating call waiting for calls

If the function is activated during a call, you will hear a call waiting tone to signal that
another caller is trying to get through (
When call waiting is deactivated, the caller will hear the busy tone if you are already
making a call.
Activating/deactivating call waiting
v Ç
¢
Select Services
q
Press the control key to select Call Waiting.
§Change§
Press the display key to activate/deactivate the function (

Using call forwarding (CF)

When forwarding a call, the call is diverted to another connection. You can use call
forwarding as a Gigaset N720 DECT IP Multicell System function or as a service offered by
the VoIP PABX/provider.
v Ç
¢
Select Services
¤
You can enter data as follows:
Status
Select On/Off to activate/deactivate Call Divert.
Phone Number
Enter the number to which the call is to be diverted. You can enter a fixed line, VoIP or
mobile number.
When
Select All Calls/When Busy/No Answer.
All Calls: Calls are diverted immediately i.e., no more calls are signalled on your phone.
No Answer: Calls are diverted if no one accepts the call within several rings.
When Busy: Calls are diverted when your line is busy.
If the service is provided via the DECT Manager:
§OK§
Press the display key to activate the call forwarding function.
If you are using the service offered by the VoIP PABX or a provider:
§Send§
Press the display key.
Please note
u
Any call for the handset that has been diverted is entered in the call lists.
u
If a call is forwarded to a participant who is not available (e.g., because their
handset is switched off ), the call is rejected after a short time.
£
page
¢
Call Divert
Setting phone functions
33).
³
= on).
37